ATON AIS-015 is designed for radio transmission of AIS information on CHO and it meets the requirements of IEC 62320-2. AIS ATON-015 is designed for visualization in ECDIS of buoys, lanterns and other real and virtual navigation marks in marine and terrestrial AIS for solving problems of prevention of collisions of vessels and improving safety of navigation. AIS ATON-015 can be installed on plastic buoys type 400/5, 400/7, 225/4 - at the top of the battery compartment of buoys, markers and SNL - in close proximity to the lantern.
ATON AIS-015 transmits messages №21, 6, 8, 12, 14 according to ITU-R M1371-3.
| Operating frequency, MHz |
161,975 (channel 87В) and 162,025 (channel 88В) |
| Transmitter power, W |
4,5 ± 0,1 or 36,5dBm |
| Emission class |
F1B |
| Modulation |
Frequency with GMSK manipulation |
| Channel width, kHz |
50 |
| Antenna design |
0,21λ-pin or ¼ λ-pin |
| Polarization |
Vertical |
| Wave resistance to antenna output, Ohm |
50 |
| Power supply, Volt |
From 9 to 30 |
| Operating temperature range |
From –40° С to +50° С, max from –50° С to +70° С. |
| Housing material |
Aluminum, powder paint |
| Size L х W х H, mm |
123 х 62 х 32,4 |
| Mass, kg |
0,56 |
| Setting up |
Via interface RS-232 |
| Operating period |
5 years |
| Storage period |
5 years |
| Additional outputs |
2 analog inputs;2 digital inputs;
2 digital outputs |
| Included in the set |
AIS ATON-015 + Technical passport |
