{"id":3704,"date":"2024-10-07T12:45:48","date_gmt":"2024-10-07T12:45:48","guid":{"rendered":"https:\/\/gotta.ee\/?post_type=product&p=3704"},"modified":"2025-06-30T17:32:46","modified_gmt":"2025-06-30T17:32:46","slug":"tank-adapter-ydta-01","status":"publish","type":"product","link":"https:\/\/gotta.ee\/et\/product\/tank-adapter-ydta-01\/","title":{"rendered":"Tank Adapter YDTA-01"},"content":{"rendered":"
\"\"<\/div><\/div>
<\/div>

The NMEA 2000 Tank Adapter YDTA-01 allows you to connect an existing resistive or voltage type fluid level sensor installed on a tank and display the fluid level on NMEA 2000 devices, including chart plotters and instrumental displays.<\/span>
\n<\/strong><\/p>\n

The Adapter can be configured to report one of the seven fluid types defined in the NMEA 2000 standard: Diesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. The tank number can be configured up to 16 tanks of one type are allowed in an NMEA 2000.<\/p>\n

If you only have one tank, look at\u00a0<\/span>model YDTA-04<\/a>. It can be configured from MicroSD card and log fuel usage. It is also available with NMEA 2000 or SeaTalk NG connector.<\/p>\n

The Device can be used with European (10 to 180 Ohm range), American (240 to 33 Ohm range) or Japanese (0 to 310 Ohm range) standard fluid level sensors as well as with any nonstandard sensors with maximum resistance less than 400 Ohm. The Device can also be used with fluid level sensors, which output an analog voltage signal in the range of 0 to 16 Volts.<\/p>\n<\/div><\/div>

<\/div>
\"\"<\/a>
tank_adapter_ydta-01<\/div><\/div><\/div>
<\/div>

The Adapter can be installed as a standalone measuring device, in parallel with an existing analog gauge (2-coils and 1-coils gauges are supported, see Picture 2), or in parallel with a Volvo Penta engine’s MDI (Mechanical Diesel Interface) box. If you have a combined gauge where you choose the value to display with a button, the Adapter will smoothly work with it, too.<\/span><\/p>\n<\/div><\/div>

\"\"<\/a>
1coil_2coil_gauges<\/div><\/div><\/div>
<\/div>

Fluid tank level sensor readings can be calibrated with 12 calibration points to get accurate readings on tanks of any shape. Parasitic resistance of the sensor wires can be compensated in the Device’s settings.<\/p>\n

The Adapter is equipped with a Micro SD card slot intended for configuration, firmware updates, diagnostics and data logging. No special software is required. You only need a device (laptop or smartphone) with a MicroSD card reader and a simple text editor.<\/p>\n

The Tank Adapter can be\u00a0<\/span>converted to a pressure sensor adapter\u00a0<\/span>and work as an adapter for a Volvo Penta KAD\/TAMD oil pressure sensor or other resistive or voltage pressure sensor.<\/p>\n

Use with our other products:<\/p>\n