{"id":3728,"date":"2024-10-07T13:09:10","date_gmt":"2024-10-07T13:09:10","guid":{"rendered":"https:\/\/gotta.ee\/?post_type=product&p=3728"},"modified":"2025-06-30T17:31:36","modified_gmt":"2025-06-30T17:31:36","slug":"rudder-adapter-ydra-01","status":"publish","type":"product","link":"https:\/\/gotta.ee\/et\/product\/rudder-adapter-ydra-01\/","title":{"rendered":"Rudder Adapter YDRA-01"},"content":{"rendered":"
\"\"<\/div><\/div>
<\/div>

The NMEA 2000 Rudder Angle Adapter YDRA-01 allows you to connect an existing resistive type rudder angle sensor installed on a rudder and supply NMEA 2000 autopilots, chart plotters and other devices with the rudder angle.<\/span>
\n<\/strong><\/p>\n

The Device can be used with a rudder angle sensor with maximal resistance less than 400 Ohm, including European (10 to 180 Ohm range) or American (240 to 33 Ohm range) standard sensors, and with 0-5V voltage output sensors.<\/span><\/p>\n<\/div><\/div>

<\/div>
\"\"<\/a>
rudder_adapter_YDRA-01R_YDRA-01N<\/div><\/div><\/div>
<\/div>

The Adapter can be installed as a standalone measuring device, or work together with a digital gauge, or in parallel with an existing analog gauge (2-coils and 1-coils gauges are supported, see Picture 2). If you have a combined gauge where you choose the value to display with a button, the Adapter will smoothly work with it, too.<\/span><\/p>\n<\/div><\/div>

<\/div>
\"\"<\/a>
ydra_1coil_2coil_gauges<\/div><\/div><\/div>
<\/div>

Rudder angle readings can be calibrated with up to 7 calibration points to compensate for non-linearity of the sensor’s resistance value vs rudder angle. Parasitic resistance of the sensor wires can also be compensated in the Device settings.<\/p>\n

The Adapter is equipped with a Micro SD card slot intended for configuration, firmware updates, diagnostics and data logging. No special software is required. You only need a device (laptop or smartphone) with a MicroSD card reader and a simple text editor.<\/p>\n

Use with our other products:<\/p>\n