Lighthouse equipment
-
AIS ATON-015
ATON AIS-015 is designed for radio transmission of AIS information on CHO and it meets the requirements of IEC 62320-2. AIS ATON-015 is designed for visualization in ECDIS of buoys, lanterns and other real and virtual navigation marks in marine and terrestrial AIS for solving problems of prevention of collisions of vessels and improving safety of navigation. AIS ATON-015 can be installed on plastic buoys type 400/5, 400/7, 225/4 - at the top of the battery compartment of buoys, markers and SNL - in close proximity to the lantern. ATON AIS-015 transmits messages №21, 6, 8, 12, 14 according to ITU-R M1371-3.Read moreOperating frequency, MHz 161,975 (channel 87В) and 162,025 (channel 88В) Transmitter power, W 4,5 ± 0,1 or 36,5dBm Emission class F1B Modulation Frequency with GMSK manipulation Channel width, kHz 50 Antenna design 0,21λ-pin or ¼ λ-pin Polarization Vertical Wave resistance to antenna output, Ohm 50 Power supply, Volt From 9 to 30 Operating temperature range From –40° С to +50° С, max from –50° С to +70° С. Housing material Aluminum, powder paint Size L х W х H, mm 123 х 62 х 32,4 Mass, kg 0,56 Setting up Via interface RS-232 Operating period 5 years Storage period 5 years Additional outputs 2 analog inputs;2 digital inputs; 2 digital outputs Included in the set AIS ATON-015 + Technical passport -
ULL 3-15
Navigation LED lantern ULL 3-15 is designed for use in multilevel monitoring systems. Installed on offshore and onshore aids to navigation (can be used in a set primary-reserve). Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
Light Buoys Catalogue
Spar buoy 160 Series Spar buoy 160/2Spar buoy 160/4 Spar buoy 160/4Sea buoy 225/6 nonlight Nonlight buoy 225/6Sea buoy 500/5 Technical overview
Channel buoy Technical overviewChannel light buoy Technical overviewSea buoy 1000 Technical overviewSea buoy 400 Technical overviewInstallation manual Forankring -
FSN-03MR-ST
Navigational LED lantern Gotta-NVL(FSN-03MR-ST) (for marine, riverine) for use of monitoring aids to navigation on stationary navigation sign in the seas, rivers, canals, reservoirs, lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-SK
Navigational LED lantern Gotta-NVL(FSN-03MR-SK) (for marine and riverine) for use of monitoring aids to navigation on stationary navigation sign in the seas, rivers, canals, fairways, rivers, reservoirs and lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-S
Navigational LED lantern Gotta-NVL(FSN-03MR-S) (for marine, riverine) for use of monitoring aids to navigation on leading line navigation signs to indicate ship routeing in the seas, rivers, canals, reservoirs, lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-MK
Navigational LED lantern Gotta-NVL(FSN-03MR-МК) (for marine and riverine) for use of monitoring aids to navigation on stationary navigation signs in the seas, rivers, canals, fairways, rivers, reservoirs and lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-M
Navigational LED lantern Gotta-NVL(FSN-03MR-M) (for marine and riverine), installed on floating warning signs (light buoys and spar buoys) for indications and designations of the fairways at the seas, rivers, canals, reservoirs, lakes and for fencing of separate navigational hazards. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-D
Navigational LED lantern Gotta-NVL(FSN-03MR-D) (for marine, riverine) for use of monitoring aids to navigation on stationary navigation signs to indicate ships routeing in the seas, rivers, canals, reservoirs, lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-B’
Navigational LED lantern Gotta-NVL(FSN-03MR-B') (for marine and riverine) without remote controlling (monitoring) system, installed on floating warning signs (light buoys and spar buoys) for indications of navigational hazards and designation of ship routeing at sea channels, and anchorage places at the seas, rivers, canals, reservoirs, lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
FSN-03MR-B
Navigational LED lantern Gotta-NVL(FSN-03MR-B) (for marine, riverine) for use of monitoring aids to navigation on floating warning signs (light buoys and spar buoys) for designation of navigational hazards, indication of ship routeing, sea channels and anchoring places at seas, rivers, canals, reservoirs, lakes. Visibility range, glimpse characteristic and the colour of light are determined in accordance with the requirement of the International Association of Lighthouse Authorities (IALA).Read more -
LightHouse Control
LightHouse Control is a multifunctional software product developed to monitor the condition (appropriate for lighthouse lanterns) and location (appropriate for floating buoys and their lanterns) of navigational equipment. LightHouse Control consists of:Read more- Electronic mapping system;
- Real-time GSM module operation and low-orbit satellite communication systems NKCC and УКВ;
- GPS modul (accuracy range up to 5 meters);
- Tools for working with database of messages outcoming from sensors or lanterns СНО;
- Technical condition of the lantern;
- Power supply status (an alarm will be activated in case the power supply drops more than 30% or if it falls below the assigned critical level);
- Communication module status, time of the last communication session;
- Information from additional sensors (impact sensor comes as standard equipment);
- Coordinates of the current location and distance from the initially assigned location;
- Allows viewing of previous data based on selected parameters and time period.
-
Monitoring
LightHouse Control is a multifunctional software product developed to monitor the condition (appropriate for lighthouse lanterns) and location (appropriate for floating buoys and their lanterns) of navigational equipment. LightHouse Control consists of:Read more- Electronic mapping system;
- Real-time GSM module operation and low-orbit satellite communication systems NKCC and УКВ;
- GPS modul (accuracy range up to 5 meters);
- Tools for working with database of messages outcoming from sensors or lanterns СНО;
- Technical condition of the lantern;
- Power supply status (an alarm will be activated in case the power supply drops more than 30% or if it falls below the assigned critical level);
- Communication module status, time of the last communication session;
- Information from additional sensors (impact sensor comes as standard equipment);
- Coordinates of the current location and distance from the initially assigned location;
- Allows viewing of previous data based on selected parameters and time period.
-
Buoys Comparative Analysis
General Description Our Light Buoys are made of high density polyethylene (LLDPE) and are filled with special styrofoam (EPS). Application of the rotational molding manufacturing method makes our buoys not only environmentally friendly, but also strong and lightweight with sophisticated body protection from hazardous effects of oil, gas, marine organisms, salt and fresh water and exposure to ultraviolet rays. General information Materials: All buoys are manufactured using extruded polyethylene with a rotationally molded external shell. The inside is filled with freon-free polystyrene; Wall thickness: from 5 mm to 18 mm; Height: from 3000 mm to 7000 mm; Diameter: from 160 mm to 1000 mm; Weight: from 40 kg to 250 kg (depending on the model); Ballast: from 22 kg to 200 kg; Anchor: from 200 kg to 2000 kg (please refer to ………….). Equipment: Light Reflector: standard for all models Radar Reflector: standard for all models Life Cycle: up to 10 years Warranty: 2 years Certificates: Quality Certificate: ISO 9001:2000. Accreditation: all products are officially licensed by the Ministry of Defense and Ministry of Transport of the Russian Federation Optional Еquipment: LED Lantern GOTTA NVL-M Distant Monitoring SystemRead moreBuoys Comparative Analysis
Polyethylene Buoys Metal Buoys BMSL-88M DIMENSIONS Production material Polyethylene Metal Body composition One piece construction One piece construction Height From 3000mm to 7000mm From 1600mm to 6700mm Diameter From 160mm to 1000mm Up to 1600mm Wall thickness From 5mm to 18mm Up to 5mm Weight From 40kg to 250kg 2300kg Anchor chain diameter 19mm 28mm Anchor weight From 200kg to 1000kg Up to 2500kg Height of lantern 3500mm 3500mm Minimum draft 2500mm 3300mm APPLICATION Application in deep waters Up to 50 meters Up to 50 meters Application in shallow waters From 3 meters From 5 meters Application in currents Up to 6 knots Up to 6 knots Application in ice conditions Ice thickness up to 1 meter Ice thickness up to 1 meter EXTERNAL ENVIRONMENT Resistance to corrosion Eternal resistance to salt and fresh water Needs regular maintainance Resistance to ultraviolet Eternal protection from UV Fading of colour Resistance to oil corrosion Eternal resistance to oil Not protected from oil corrosion Regularity of dye Never Annually In case of damaged body Stays floating on water Stays floating on water LIFECYCLE AND CARE Lifecycle Up to 10 years Up to 10 years Resources for Service, Maintainance and Transport Vessel with crane lifting capasity of 1 tonn Vessel with crane lifting capasity of 3 tonns SOCIAL RESPONSIBILITY CO2 emission during production Minimal High emission of CO2 Our polyethylene buoys are distinguished by their low weight, high density hence strength of the body and long lasting period of exploitation without having to replace due to corrosion or fading of color.
In comparison with metal buoys the polyethylene buoys do not require regular maintainance. The general checking of the buoys is carried out once in 3-5 years to control the state of the anchor chain; other things being equal the polyethylene buoy is not effected by hazardous weather conditions or salt water corrosion. -
Light House Light-Optical Lamp GOTTA NVL-M
- Power: 5,6-22,5 V
- Current: 200 mA
- Color of light can be customized
- Technical parameters can be customized
- Monitoring and GPS- additional option
- Mass: 1.3 kg
- Operating temperature rang: -50 C to +70 C
- Production time: 4 weeks
- Life cycle: 5 years or 10000 hours